Vacancy title: Scoop Operator
Bulyanhulu Gold Mine is seeking to recruit Scoop Operator to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Engineering and Services department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.
Recommended:
• Reporting to: Mining Shift Supervisor
• Work Schedule: 7 Days On / 7 Days Night / 7 Days Off
• Duration: Permanent
RESPONSIBILITIES:
• Conduct remote operation in open stope
• Operate multiple Loader Types & capacities
• Identify & Control efficiencies and delay
• Perform Towing/ Recovery activities
• Identify improved operating methods
• Observe cycle times
• Perform Road Building Activities
• Discuss with Supervisor how to improve operating & cycle efficiency
• Monitoring and control operating & cycle efficiency
• Monitoring and control loading & cycle efficiency
• Assist with the training and skills development of trainees.
• To provide technical, practical and field support in various working
areas of the mine focusing in increasing work effectiveness and
productivity while lowering cost through improved good operational
practices
• Ordinary secondary education
• 3yard &1400 Yard Scoop Certification
• Valid Driving Licence
EXPERIENCE REQUIREMENTS:
• Minimum of 5 years’ experience as A scoop operator
• Experience in operating machine in large underground mining operation
Read Also:
SKILLS / KNOWLEDGE REQUIREMENTS:
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Read Also:
Vacancy title: Mine Surveyor
• Reporting to: Chief Underground Surveyor
• Work Schedule: 14 Days On / 7 Days Off
• Duration: Permanent .
RESPONSIBILITIES:
• Issuing Survey instructions to the relevant Mine Captains and
ensuring mining department and contractors adhere to these instructions.
• Ensuring all fired rounds are correctly recorded so as to monitor development trend of each and every active heading.
• Provide survey support to ensure mine production and development is
done as per design and in accordance with established standards and
procedures while ensuring minimum disruption to production and
development cycle.
• Ensure precision Survey equipment’s are kept
in good serviceable condition by carrying out regular checks, use
permissible adjustments and keep track of equipment performance for
scheduling specialized maintenance and authorized dealers’ shops
•
Implement BGML employee performance management process to ensure optimum
employee performance and identify and report any substandard
performances or behaviors.
• Performing minimum Quality control processes as per standard procedures.
• Provide comprehensive end of shift reports.
• Keep track of current Mine Instructions and archiving obsolete ones.
• Provide effective on-the-job training and coaching to ensure employees gain new skills and achieve their maximum potential.
• Ensure there is adherence to all BGML policies and procedures.
• Ensure all surveys are done so as to exceed the minimum accuracy standards specified in the survey code of practice.
• Ensure safe work practices, i.e. attending compulsory safety courses
and meetings, use of required PPE, incident/accident reporting and
ensuring total adherence to all Safety, Occupational Health and
Environmental Policies, as well as other relevant policies, procedures
and guidelines.
Read Also:
• Degree in Mining Survey, Land Surveying or Geometrics Engineering from a recognized Tertiary Education Institution
• At Least Class “D” Valid Driving License
EXPERIENCE REQUIREMENTS:
• At least Two years working experience in Underground Mining environment.
• Experience in Software’s – Mincard, Surpac, Deswik, Maptek point studio.
• Experience in using and operating Leica and Trimble survey instruments ie Total stations and RTK GPS
• Experience in using Survey scanners for both Underground and Surface.
Read Also:
SKILLS / KNOWLEDGE REQUIREMENTS:
• Knowledge of any relevant surveying, CAD or mine design software is beneficial
• Knowledge of MS Office suite of programs is beneficial Sound practical experience in any conventional surveying method
• Strong coaching and mentoring skills
• Strong attention to detail
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health and Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Vacancy title: Survey Technician
• Reporting to: Mine Underground Surveyor
• Work Schedule: 7 Days Day Shift/ 7 Days Night Shift / 7 Days Day Off
• Duration: Permanent .
Read Also:
RESPONSIBILITIES:
• Ensure all fired rounds are correctly recorded so as to monitor development trend of every active mining heading.
• Ensure correct DGPS Base setup system
• Compiling the information in a system that it can be retrieved and used
• Development pickup and pickup processing mapping on mined areas
• Ensure all survey station reports and mine stakeout plans are filed correctly.
• Ensure all Survey stations are positioned and placed correctly as directed by the Mine Surveyor
• Regular stock taking of survey consumables to ensure there is at
least the minimum required kept in survey store at all times.
• Installation of grade pins, lasers and stations
• Mark-up of Holes Electric hole and Paste holes
• Face mark-ups on drilling areas
• Setup of instrument below station in underground
• Assists the Mine Surveyor in any task required for the maintenance of Survey control
• Numbering batteries of all electronic equipment and ensuring they are
charged correctly, keeping record of the mandatory discharging process
of all such batteries.
• Daily vehicle cleaning, checks and timely
reporting of any defects. Liaise with Maintenance Department when
reporting defects at regular service intervals.
• Sufficient on the
job training and working experience through other documented roles in
underground mining surveying that are considered acceptable by company
authorities
• Ensure safe work practices, i.e. attending compulsory
safety courses and meetings, use of required PPE, incident/accident
reporting and ensuring total adherence to all Safety, Occupational
Health and Environmental Policies, as well as other relevant policies,
procedures and guidelines.
Read Also:
• A Survey Technician’s Certificate.
• Technician certificate in any of the survey related fields of Cartography, Civil engineering, mining engineering, geology should be accompanied with experience of working as a survey assistant in underground mine environment.
EXPERIENCE REQUIREMENTS:
• At least 2 years working experience in Underground Mining environment as a survey technician.
• Experience in Software’s – Mincard, Surpac, Deswik, Maptek point studio.
• Experience in using and operating Leica and instruments ie Total stations and RTK GPS
• Experience in using Survey scanners for both Underground and Surface.
Read Also:
• Knowledge of any relevant surveying, CAD or mine design software is beneficial
• Knowledge of MS Office suite of programs is beneficial Sound practical experience in any conventional surveying method
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health and Safety Act awareness.
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Vacancy title: Hose Technician
• Reporting to: Mobile Maintenance Supervisor
• Work Schedule: 5 Days Day Shift / 2 Days Day Off
• Duration: Permanent .
Read Also:
RESPONSIBILITIES:
• Ensure safe work practices by attending compulsory safety courses and meetings
• Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
• To carry out assembly of hydraulic and industrial hose assemblies in line with company procedure
• Perform hose inspection on the machine
• Perform inspections and repair of lubrication system on machines
• Ensure project requirements are met within time allowed
• Ensuring that stock received from main warehouse is correct and recorded
• Ensuring that the site supervisor is aware of any stock requirements
• Work as part of the team with members of the workshop and other departments
• Responsible for Identifying, measuring, cutting and assembly of hydraulic hoses and fittings.
• Record all hose assemblies in hose register
• Record and apply a hose tag on all hose assemblies as prescribed
• Plan stock in advance and to manage stock to ensure that stock items are always available
• Submit on a daily basis a hose failure report as describe to the client as per procedure
• Installation and repair all greasing systems on machines and submit a detailed report
• To repair oil and grease pumps
• Ensure and maintain proper housekeeping at working area
• Perform all other tasks assigned by Supervisor
• Ordinary secondary education
• Mechanical trade certificate – (FTC, IMTT & VETA)
• Valid Tanzanian driving license.
EXPERIENCE REQUIREMENTS:
• 3 years’ experience in similar role
• Experience in Underground Operations as well as the mobile equipment
Read Also:
SKILLS / KNOWLEDGE REQUIREMENTS:
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Vacancy title: Assistant Boilermaker
• Reporting to: Fabrication Workshop Supervisor
• Work Schedule: 5 Days Day Shift / 2 Days Day Off
• Duration: Permanent .
Read Also:
RESPONSIBILITIES:
• Carry out mechanical repair and preventative maintenance to maintain
equipment in a safe and efficient manner to achieve production and cost
targets.
• Interpretation ,access and reading of job specifications
and relevant information • Ensuring that the selection of materials for
repairs, replacements and inspection comply with the required
standards.
• Correct selection of hand power tools hand, welding
equipment, thermal cutting equipment and thermal heating equipment and
safety equipment for safe use.
• Understanding of engineering and
structural drawings, interpreting sketches and drawings application of
measuring equipment, marking, welding terms, codes and symbols and
cutting tools
• Using oxy acetylene welding & cutting, thermal gouging and thermal heating.
• Interpretation of materials safety data sheets (MSDS)
• Planning of the logical sequence of welding operations
• Completion of basic welding, heating and cutting job cards/ work orders, work permit
• Carry out fabrication work and corrective maintenance to improve
equipment availability, reliability, safety and functionality.
•
Ensure that maintenance practices result in maximum mill availability.
Meeting or exceeding planned mill availability is a Key Performance
Indicator.
Read Also:
• Assist other mechanical tradesmen in maintenance work as required.
• Complete assigned work in a timely manner with minimum supervision and to an internationally acceptable standard.
• Ensure Supervisor and all stakeholders are kept informed on equipment availability status.
• Actively participate in training activities to gain new skills, develop full potential and assume increasing accountability.
• Under the direction of the Supervisor, provide appropriate on-the-job training and coaching to less experience personnel.
• Follow Safe Work Procedures and other maintenance procedures.
• Carry out any other duties as assigned by the Supervisor within your capacity without jeopardizing Health and safety.
• Ensure safe work practices, i.e. attending compulsory safety courses
and meetings, use of required PPE, incident/accident reporting and
ensuring total adherence to all Safety, Occupational Health and
Environmental Policies, as well as other relevant policies, procedures
and guidelines
• Ordinary level certificate – Form IV
• Welding and Fabrication certificate – (FTC, IMTT & VETA)
EXPERIENCE REQUIREMENTS:
At least 3 to 6 Months experience in similar role
Read Also:
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Vacancy title: Blaster
• Reporting to: Mining Shift Supervisor
• Work Schedule: 7 Days On / 7 Days Night / 7 Days Off
• Duration: Permanent .
RESPONSIBILITIES:
• Safe and Effective Compliance to daily Pre Start equipment inspections and Operation
• Perform Field Level Risk Assessments and Entry Examinations at the
work areas and ensure the health and safety of team members, visitors
and contractors at the working area.
• To take full responsibility for all blasting related operations, infrastructure and resources.
• To take full responsibility for proper care, conditions, and use of all blasting machinery and equipment.
• Prepare for charging activities
• Ensure all Charging activities are Recorded and reported
• Ensure that facilities and equipment are being used safely and that appropriate work method is being applied.
• Uncouple equipment are remove from workplace
• Perform charging activities
• Ensure safery is followed when working at height
• Install services, air, water, ventilation
• Conduct dewatering activities
• Perform I-Kon blasting
• Identify improved charging & blasting methods
• Observe advanced metre per blast
• Assist with the training and skills development of trainees.
• To provide technical, practical and field support in various working
areas of the mine focusing in increasing work effectiveness and
productivity while lowering cost through improved good operational
practices.
Read Also:
• Ordinary secondary education
• Underground Blasting Licence
• Valid Driving Licence
EXPERIENCE REQUIREMENTS:
• Minimum of 3 years underground Mining experience preferably in blasting operations
SKILLS / KNOWLEDGE REQUIREMENTS:
• Charging and Blasting methods in Long hole stopes
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Read Also:
Vacancy title: Geologist
• Work Schedule: 14 Days On / 7 Days Day Off
• Duration: 2 Years .
RESPONSIBILITIES:
• Ensure active waste and ore development faces are mapped in accordance to the scheduled plan.
• Update daily grade control drill hole information on the appropriate “Database/Spreadsheets” in an accurate and timely manner
• Complete and accurate grade control database (including QAQC component) and Ore Production database/spreadsheets available at all times
• Ensure the delineation of economically mineable ore zone to ensure minimum dilution and maximum recovery of gold
• Active involvement and assistance in underground grade control practices and procedures through effective monitoring and communication.
• Ensure timely and accurate underground sampling, lithological and structural mapping, and logging of core to provide geological information for the optimum mine design and daily decision-making processes.
• Ensure updated underground channel/face sample results are available in both paper and digital version, geological logging and assay reporting proceeds
• Ensure underground channel and grade control samples are delivered to the laboratory in a timely manner, sample submission forms are complete and accurate, samples are clearly labelled and in correct order, and that QAQC samples are present according to procedure.
• Develop a sound knowledge of the geological controls of the different ore bodies at Bulyanhulu Mine and the regional geological settings.
• Provide the geological support to ensure the optimum development of the ore body.
• Complete project work and presentations to a professional standard as and when required.
• Ensure that employees and contractors comply with Barrick’s safety and environmental standards and any legislative requirements.
• Ensure timely and accurate geology inputs to facilitate the preparation of mine plans.
• Develop an understanding of support standards and methods used underground to ensure a safe working environment
• Monitor the progress of geology resources against daily production plans. Assess delays and re-prioritise tasks / personnel as required. Immediately inform the Underground Geology Superintendent or Mineral Resources Manager of delays that may affect mining targets
• Monitor underground Ore mining and haulage practices to ensure are conducted according to agreed standards and procedures
• Achievement of agreed targets for the department in terms of minimum dilution of Ore, maximum gold grade production, delineation of resources and reserves and Update and monitor systems to ensure geology and assay databases are complete, accurate and accessible.
Read Also:
• University Level Certification in Geology (BSc Geology degree)
• Valid Tanzanian Driving Licence
EXPERIENCE REQUIREMENTS:
• Minimum 2 years working experiences in underground mine
SKILLS / KNOWLEDGE REQUIREMENTS:
• Knowledge of computer applications programs (Datamine software package or any other mining software)
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless.
Vacancy title: Generator Technician
• Reporting to: Mobile Fleet Surface Supervisor
• Work Schedule: 5 Days Day Shift / 2 Days Day Off
• Duration: Permanent .
RESPONSIBILITIES:
• Ensure safe work practices by attending compulsory safety courses and meetings
• Wear the appropriate PPE for the task at hand;
• Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
• Comply with maintenance procedures and ensure all task are completed to OEM standards
• Conduct equipment pre start checks and daily inspection
• Perform mechanical repairs and preventative maintenance for
generators in a safe and efficient manner to achieve production and cost
Targets
• Conduct troubleshooting, fault finding and corrective maintenance for generators and CAT Engines.
• Ensure that maintenance practices result in maximum equipment availability.
• Perform PM inspection according to the maintenance requirements and ensure preventive maintenance compliance.
• Conduct upgrades/ modification as per OEM Standards.
• Removal of components and replacement.
• Provide accurate and timely feedback to the Supervisor on conditions that may affect functionality of equipment.
• Comply on shift handover process.
• Carry out other task assigned by Supervisor Mobile Maintenance Surface.
Read Also:
• Mechanical trade certificate – (FTC, IMTT & VETA)
EXPERIENCE REQUIREMENTS:
• 3 – 5 Years’ experience in a similar role(Generator Technician)
SKILLS / KNOWLEDGE REQUIREMENTS:
• Knowledge on Caterpillar SIS and ET
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
• Reporting to: Mobile Fleet Surface Supervisor
• Work Schedule: 5 Days Day Shift / 2 Days Day Off
• Duration: Permanent .
Read Also:
RESPONSIBILITIES:
• Ensure safe work practices by attending compulsory safety courses and meetings
• Wear the appropriate PPE for the task at hand;
• Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
• Comply with maintenance procedures and ensure all task are completed to OEM standards
• Conduct equipment pre start checks and daily inspection
• Perform mechanical repairs and preventative maintenance for
generators in a safe and efficient manner to achieve production and cost
Targets
• Conduct troubleshooting, fault finding and corrective maintenance for generators and CAT Engines.
• Ensure that maintenance practices result in maximum equipment availability.
• Perform PM inspection according to the maintenance requirements and ensure preventive maintenance compliance.
• Conduct upgrades/ modification as per OEM Standards.
• Removal of components and replacement.
• Provide accurate and timely feedback to the Supervisor on conditions that may affect functionality of equipment.
• Comply on shift handover process.
• Carry out other task assigned by Supervisor Mobile Maintenance Surface.
• Mechanical trade certificate – (FTC, IMTT & VETA)
EXPERIENCE REQUIREMENTS:
• 3 – 5 Years’ experience in a similar role(Generator Technician)
Read Also:
• Knowledge on Caterpillar SIS and ET
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless
Vacancy title: Service Data Clerk
• Reporting to: Mobile Maintenance Supervisor
• Work Schedule: 7 Days Day Shift/ 7 Days Night Shift / 7 Days Day Off
• Duration: Permanent
RESPONSIBILITIES:
• Ensure safe work practices by attending compulsory safety courses and meetings
• Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
• Ensure all parts requested by the maintenance team are delivered in a timely manner.
• Collect all planned service and breakdown parts ready for the oncoming shift.
• Work closely with First Line Leaders to ensure efficiencies in workshop.
• Record data from work orders and various other documents within the
Underground Maintenance Department into the CMMS and other computer
applications in accordance with established procedures and systems,
• Enter fuel consumption data into Fuel database.
• Enter breakdown record into downtime database.
• Enter equipment monitor points into CMMS.
• Enter water meter reading data in database or/and Excel sheet.
• Enter work requests into the CMMS from clerical forms filled out
either by non-maintenance personnel or by word of mouth from the
originator of the request.
• Print and distribute routine reports according to established procedures and systems.
• Maintain clerical document filing systems in an approved, systematic
way such that any document may be retrieved immediately and expired
documentation is properly disposed of.
• Ensure the availability and safekeeping of all regulatory documentation within the section.
• Mail Circulation – Communicate the Approval status of forms & documents
• Ensure forms are circulated and collected on time
• Report forms and documents not received on day to day basis
• Make photocopies of all approved forms and documents for filing purpose
• Distribute letters and other documents from HR to Superintendents
• Filing of signed contractor invoices for future references
• Safeguard confidentiality of documents information
• Control Office Supplies, Summarize the weekly Requirements of Office
Supplies, Order office supplies from the supply store and Ensure an
adequate supply of commonly used office forms is available and onto the
distribution board.
• Collect daily pre starts from previous shifts
and ensure any critical faults are passed onto the leading hands for
immediate attention.
QUALIFICATION REQUIREMENTS:
• Ordinary secondary education
• Mechanical/Electrical trade certificate – (FTC, IMTT & VETA)
• Valid Tanzanian driving license.
Read Also:
EXPERIENCE REQUIREMENTS:
• 3 years’ experience in similar role
• Experience in Underground Operations as well as the mobile equipment
SKILLS / KNOWLEDGE REQUIREMENTS:
• Excellent communication in English ,both writing and verbal
• Hazard identification and Risk assessment
• Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
• A comprehensive compensation package including bonuses, benefits, and where applicable.
• Ability to make a difference and lasting impact.
• Work in a dynamic, collaborative, progressive, and high-performing team.
• Opportunities to grow and learn with the industry colleagues are endless.
Job application procedure
Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines
• Rename your CV in this format CV – YOUR FULL NAME
• Indicating the role title “Scoop Operator “ in the subject of your email
• Send your application via e-mail to: bulyrecruitment@barrick.com
Read Also:
If you are not contacted by Barrick – Bulyanhulu Gold Mine LTD within
thirty (30) days after the closing date, you should consider your
application as unsuccessful. Short listed candidates may be subjected to
any of the following: security clearance; competency assessment;
physical capability assessment, reference checking. Please forward
applications before 08th December 2020.
BEWARE OF CONMEN!
BGML does not receive money in exchange for a job position. Should you
be asked for money in exchange for a job offer or suspect such activity,
please report this immediately to our Compliance Hotline, by calling
+1-877-246-5399 or through www.barrickgold.ethispoint.com
