13 New Employment opportunities at Q-Sourcing Tanzania Limited

Position: Chemical Engineers

About This Job:

Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.

On behalf of one of our Tanzania based clients, we are looking for a competent and experienced Chemical Engineers. He/she will be involved in the design and development of a diverse range of products.

Chemical Engineer Job Responsibilities:

Perform chemical analysis and physical property testing of materials and products.
Research, design, and develop new production processes.
Coordinate and perform tests.
Analyse data to develop conclusions.
Communicate results of analysis and research.
Evaluate current processes and develop improvements to safety, quality, and efficiency.
Create standards and specifications for processes, facilities, products and tests.
Assist in the establishment of timelines and budgets.
Install, maintain, and inspect equipment and facilities.
Perform routine calibration and troubleshooting of instruments.
Provide training and mentorship to technical staff.

Chemical Engineer Qualifications/Skills:

Applied knowledge of analytical chemistry techniques
Demonstrated ability to solve highly technical problems
Strong technical writing ability
Direct experience with the use of spreadsheet and database software to compile, analyse, and present data
Familiarity with process improvement methodologies (Six Sigma, lean manufacturing)
Ability to execute tasks with minimal oversight
Excellent presentation and verbal communication skills

Education and Experience Requirements:

Bachelor’s degree in chemical engineering or a related field

Master’s degree in chemical engineering or a related field desirable is an added advantage

3 to 5 years’ experience in a production or research environment

How to apply:

Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com

Kindly mark your application as “Application ‘Chemical Engineers“In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 18th October 2019.
Only shortlisted applicants will be contacted. Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

Position: Structural Iron & Steel Worker
About This Job:
Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.

On behalf of one of our clients, we are looking for a competent and experienced Structural Iron & Steel Worker. He/she will be responsible for laying out and fabricating structural steel and sheet metal in order to build metal structures. Welds and cuts steel, interprets blueprints, and works with concrete reinforcing steel bars.

Responsibilities

Build and install iron or steel girders, columns, and other construction materials to form buildings, bridges, and other structures.
Cut, position, and bolt down steel bars to reinforce concrete.
Repair older infrastructure. Make, weld, and cut structural metal in fabricating shops.
Erect steel frames.
Direct operation of cranes to move structural steel, reinforcing bars, and other materials onto and around the construction site.
Connect steel columns, beams, and girders.
Drill holes into steel for bolts.
Number steel according to assembly instructions.
Unload and stack steel.
Attach cables to steel and then to the crane.
Hoist steel into place in the framework.
Position steel with connecting bars and spud wrenches.
Use plumb bobs, levels, and laser equipment to check alignment.
Bolt or weld piece into place.
Set reinforcing bars into forms to hold concrete.
Fasten bars together with wire.
Place spacers under rebar to lift bars off deck.
Cut bars with metal shears and torches.
Reinforce concrete with welded wire fabric.
Substitute cables for rebar.
Tighten cables with jacking equipment.
Install stairs, handrails, or curtain walls.
Make sure all pieces are fitted properly and complete repairs as necessary.

Aids in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures
Organizes and conducts field management surveillance, audits, and assessments
Offers technical guidance by acting as the business liaison to draft senior management briefs
Assists in resolving issues unique to the project or program
Plans and analyzes electronic engineering commodities
Creates test procedures and production assembly documents
Participates in team projects and related activities relative to new product development
Provides technical support to marketing and sales teams to create detailed proposals and bids
Conducts energy inspections and suggests alternative energy sources
Supports the organization in improving profitability by making necessary recommendations and controlling resources
Assigns technical staff for 24-hour maintenance coverage

Electrical Engineer Skills and Qualifications

Bachelor of Science degree in Electrical Engineering, Physics, or related field
2 to 5 years of experience with electronic circuit technology design and assembly processes
Background in electrical power applications
Experience in design, repair, and analysis of electronic systems
Exposure to electrical engineering design principles and methodologies
Knowledge of CAD software
ProE or AutoCAD preferred

Working closely with architects, clients, and other professionals
Planning, coordinating, and directing engineering teams
Developing design concepts using CAD and other software
Assessing the stresses and loads on a building or structure
Analysis of construction materials and advising which are most suitable
Consulting with clients to prepare required project specifications
Using computer simulations to forecast how structures and building will react under various conditions using computer simulations, and adapting designs and plans accordingly
Attending meetings with clients and presenting proposals
Analyzing technology, market demand, and resource, to assess the feasibility of projects
Preparing reports, drawings and designs
Preparing bids for tenders
Providing structural and other technical advice
Obtaining building regulations approval
Ensuring that projects meet environmental directives, legal guidelines and health and safety requirements
Inspecting and monitoring work undertaken by contractors
Administering contracts and managing projects
Inspecting unsafe structures, and making recommendations for demolition or repairs
Delivering progress reports to clients and senior management

Required skills

Bachelors in Civil/ Structural Engineering
MSc in structural engineering is an added advantage
A solid knowledge of construction methods, legal regulations, health and safety
Excellent mechanical, IT and mathematical skills
The ability to analyse complex problems
The capacity to explain ideas and design plans
Excellent project and time management skills
The ability to adhere to strict deadlines
Excellent verbal and written communication skills
Financial management and planning ability
Excellent people and team management skills
Creativity and innovation
Commercial awareness and business acumen
Team working and multidisciplinary skills
Excellent analytical, quantitative and critical thinking skills
Detail focussed
Ability to manage budgets

How to apply:
Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com
Kindly mark your application as “Application ‘Structural Engineers “In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 18th October 2019.
Only shortlisted applicants will be contacted. Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

Position: STEEL WORKS
About This Job:
Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.
On behalf of one of our Tanzania based clients, we are looking for a competent and experienced Steel Works.

Job Responsibilities
Measure, fabricate, cut, weld and shape steel parts such as girders, columns and frames using equipment including shears, welding tools and torches
Hoist steel parts to their appropriate location, ensuring proper alignment and positioning and bolting them into place
Assemble and use equipment, including setting up cable and chain systems, for hoisting or moving steel parts and disassemble it after completion of the task
Follow blueprint and instructions from supervisors to perform all tasks involved in assembly of steel structures; communicate with supervisors and coworkersto ensure smooth teamwork
Notify supervisors immediately of safety or structural concerns
Take apart structures or equipment in accordance with directions and standard operating procedure; repair steel components in older structures
Direct crane operators as they move and position steel components
Drill holes and align parts with framework in preparation for riveting; use tools including levels, laser tools and plumb bobs to ensure precise alignment

Job Skills & Qualification
Required:
Completed steel worker apprenticeship
Proficient in use of tools, including welding equipment, laser levels, jacks and metal shears
Able to read and understand blueprints
Knowledge of applicable safety regulations
Able to work at extremely great heights, including top levels of skyscraper
Excellent work ethic

Preferred:
Basic proficiency in use of office software
High school diploma or equivalentMetals together.

How to apply:
Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com
Kindly mark your application as “Application ‘Steel Works“ In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 27th September 2019. Only shortlisted applicants will be contacted.
Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

Position: Welders-TIG
About This Job:
Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.

On behalf of one of our Tanzania based clients, we are looking for a competent and experienced Welders-TIG. He/she will be responsible for permanently joining metal parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together.

Primary responsibilities

Use electrical currents to create heat and bond metals.
Over sea the selection and procurement of materials and equipment required for TIG welding
Measure and align work pieces using straight edge and clamps
Over sea the set up of TIG welding equipment
Operates power and hand tools
Maintains good working knowledge of welding characteristic of metal such as stainless steel
Weld materials in Flat, Horizontal, Vertical and overhead position
Adjust gas gauge to set the flow rate of shielding gas
Creates quality welds according to blueprints (weld symbol)
Inspects welds for accuracy

Qualification Requirements
General
To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required

Education and Experience
This position typically is not an entry-level job, as it requires demonstrable previous experience as a Welder.
A high school diploma or general education degree (GED) is preferred.
Minimum of three (3) to five (5) years’ experience required.

How to apply:
Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com
Kindly mark your application as “Application ‘Welder-TIG“ In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 27th September 2019.
Only shortlisted applicants will be contacted.
Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

Position: Welders- MIG
About This Job:
Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.

On behalf of one of our Tanzania based clients, we are looking for a competent and experienced Welders- MIG. He/she will be responsible for permanently joining metal parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together.

Primary responsibilities

Measure and mark work pieces using straight edges, Rulers and Calipers
Cut and smoothen metal components using portable grinders etc
Read and interpret blueprints and production drawing
Guides and directs
Bore holes through metal work pieces
Weld materials in Flat, Horizontal, Vertical and overhead position
Adjust gas gauge to set the flow rate of shielding gas
Creates quality welds according to blueprints (weld symbol)
Inspects welds for accuracy
Use electrical currents to create heat and bond metals.
Join beams in the construction of buildings, bridges, and other structures and to join pipes in pipelines, power plants, and refineries.
Weld materials such as steel and titanium.
Use a rod and heat to join metals.
Operate welding machine that feeds wire to bond materials.

Qualification Requirements
To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required

Education and Experience
This position typically is not an entry-level job, as it requires demonstrable previous experience as a Welder.
A high school diploma or general education degree (GED) is preferred.
Minimum of three (3) to five (5) years’ experience required.

How to apply:
Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com
Kindly mark your application as “Application ‘Welder-MIG“ In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 27th September 2019.
Only shortlisted applicants will be contacted.
Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

Position: Piping Foreman
About This Job:
Q-Sourcing Tanzania Limited, trading as Q-Sourcing Servtec, is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda and South Sudan.

On behalf of one of our Tanzania based clients, we are looking for a competent and experienced Piping Foreman.The Piping Foreman will assist in the supervision of craft activities to assure optimum productivity and construction compliance. The Piping Foreman will supervise the lay out, assembly and installation of various sizes and types of drain pipe. The Pipe Foreman will study project specifications with Pipe Superintendent to plan sequencing and schedule for pipe installation.

Job Description
Duties

Coordinates and supervises daily activities of the crew.
Utilizes heavy equipment to excavate, install and backfill drainage pipe.
Sequences pipe installation to reduce inference with other project activities and the public.
Continually inspects work site, surveying for potential hazards or safety concerns.
Responsible for crew safety. Establishes safe work environment that complies with the Company safety program.
Observes assigned equipment to detect machinery malfunctions. Assures the proper operation and maintenance of equipment.
Analyses job cost reports to ensure production is within budget.
Reviews and approves employee time reporting.
Maintains professional relationship with Owner.
The Piping Foreman must be able to climb on and off heavy mobile equipment safely.

Qualification Requirements
This position typically is not an entry-level job, as it requires demonstrable previous experience as a Pipe Foreman.
A high school diploma or general education degree (GED) is preferred.
Must be able to understand work directions and communicate effectively with management, fellow employees and Owner.
Minimum of three (3) to five (5) years’ experience required.
Physical Demands.
The following physical demands are representative of those that must be met by a Pipe Foreman to successfully perform the essential functions of this job.

Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties.
Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools.
Ability to lift and carry, on a frequent basis, at least 50 pounds and, at times, as much as 90 pounds, as may be assigned.
Manual dexterity to hand-carry generators, lumber and other construction materials, forms, power tools, and hand tools.
Physical dexterity involving stretching, proper placement of legs, and use of arms and hands in repetitive motions.
Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment.
Must be able to climb on and off heavy mobile equipment safely.
Frequently walk on uneven surfaces, including natural ground in varying weather conditions.
Capable of being certified to enter confined spaces, including climbing into and out of excavations up to 15 feet in depth, using ladders or crawling, as required.
Sufficient skill and visual acuity, under varying degrees of light, darkness, and weather conditions, to provide direction and flagging for operators of cranes with rated capacities of up to 300 tons.
The Pipe Foreman must be able to climb on and off heavy mobile equipment safely.

Coordinate with job site manager to configure pipe system layout.
Order proper pipes and other materials.
Select supports, hangers, and hydraulic cylinders.
Assemble materials at job site.
Select type and size of pipe.
Cut, thread, and hammer pipes according to pipe system specs.
Use saws and cutting torches to craft proper pipe sizes.
Turn off steam, water, or gas from pipe section.
Secure pipes to walls and fixtures using brackets, clamps, tools or welding equipment.
Secure pipes to radiators or tanks.
Repair and maintain pipe systems and components.
Resolve problems such as obstructions or holes.
Dip nonferrous piping materials in molten tin and lead to prevent erosion, or galvanic and electrolytic action.
Remove water from flooded manholes or basements.
Repair cracks and leaks.
Assemble and secure pipes by welding, Brazing, soldering and threading joints

Qualification Requirements
This position typically is not an entry-level job, as it requires demonstrable previous experience as a Pipe Fitter.
A high school diploma or general education degree (GED) is preferred.
Minimum of three (3) to five (5) years’ experience required.

How to apply:
Only candidates who meet the minimum criteria outlined as above are invited to send a comprehensive CV by e-mail to officetanzania@qsourcing.com
Kindly mark your application as “Application ‘Pipe Fitter“In the subject line of your email.

Note:
Deadline for applications is not later than 5:00 pm, Friday 27th September 2019.
Only shortlisted applicants will be contacted.
Q-Sourcing Tanzania Limited is an equal opportunity employer. Any solicitation will lead to disqualification

13 New Employment opportunities at Q-Sourcing Tanzania Limited

JIUNGE NA TELEGRAM CHANNEL YETU HAPA

SCHOOL MATERIALS